Gateway
The home router: a consumer WiFi 6 router doing DNS and DHCP for the flat LAN.
Network
- One private /24, DHCP pool covering most of the range, short lease time
- Fixed addresses for infrastructure (bihar, karnataka, goa, kvm) come from the router's address-reservation table, not from static config on the hosts
- ISP fiber, ONT in bridge mode, router holds the WAN address directly
- Nothing is port-forwarded; remote access to the fleet is via Tailscale
Third-party firmware
The router's chipset (MediaTek Filogic 820) has only snapshot-level OpenWrt support so far, so it runs stock firmware. Revisit once a stable OpenWrt release supports it.
IPv6
The ISP delegates a single /64 via SLAAC only. The stock firmware has no LAN DHCPv6 server and no configurable IPv6 firewall. Hosts use privacy extensions, so their addresses rotate — impractical for hosting or stable SSH. Options if stable v6 addresses are ever wanted:
- Stable SLAAC token per machine:
# /etc/systemd/network/eth0.network [IPv6AcceptRA] Token=::1 # becomes <prefix>::1 - Disable privacy extensions (EUI-64, based on MAC):
net.ipv6.conf.eth0.use_tempaddr = 0 - DHCPv6 — not available on the stock firmware.
Tailscale remains the default path for fleet SSH.